|
|
CONCISE Online Shop > Drawing & Measuring Tools > STEN-Edge Scale I (introduction) > STEN-Edge Scale II (specifications)
Placing an Order
The CONCISE Online Shop also carries the following drawing & measuring tools. - Neo-Section Scale
- LayCut Scale
- Layout Marking Scale
- Graduator / Protractor
- FLEX-Top Cutter
- Rolling Sleeve Cutter
- Spare Blade for
Rolling Sleeve Cutter
- R-Edge Cutter Mat
- Clear-tone Cutter Mat
- Double-sided Adhesive Tape
Describes the procedure for placing an order with the CONCISE Online Shop through the online system of your computer.FAQ
Introduces 'Frequently Asked Questions' by our customers on the CONCISE Online Shop.Security
Describes our policy to prevent our customer's personal information from being intruded or stolen.Consignment Sale
Introduces the stores that carry the CONCISE products on consignment.Inquiry
Mentions our telephone / facsimile number and e-mail address for the convenience of our customers.
STEN-Edge Scale CTS-20 / CTS-40
Note
- Recommended for cutting work.
- Provided with virtually damage-free stainless edges on all sides so that you may not scratch the ruler itself.
- It is so thick as 6mm (1/4") and you can press and hold mechanicals securely.
- Helps you draw and measure parallel and perpendicular lines efficiently by using 5mm (approx. 3/16") -unit sections marked on the scale.
Measurement unit: millimeter ONLY. (Feet and inches are not available on the scale.)
Model Dimensions
(mm / in.)Weight
(g / oz.)Our Price
(Japanese yen)CTS-20 210 x 40 x 6mm or 8-1/4" x 1-9/16" x 1/4" 65g or 2-5/16 oz. ¥1,750 CTS-40 410 x 40 x 6mm or 16-1/8" x 1-9/16" x 1/4" 125g or 4-7/16 oz. ¥3,500 
Note
- Best suitable for artwork such as drawing and cutting.
- Provided with a virtually damage-free stainless edge on the rear side so that you may not scratch the ruler itself.
- Helps you draw and measure parallel and perpendicular lines efficiently by using 5mm (approx. 3/16") -unit sections marked on the scale.
- In addition, the front side with the scales tilts for more operational ease.
Measurement unit: millimeter ONLY. (Feet and inches are not available on the scale.)
Model Dimensions
(mm / in.)Weight
(g / oz.)Our Price
(Japanese yen)30S 330 x 40 x 5mm or 12" x 1-9/16" x 3/16" 75g or 2-5/8 oz. ¥1,950 45S 480 x 50 x 5mm or 18-7/8" x 1-15/16" x 3/16" 140g or 4-15/16 oz. ¥3,900
Note
- Helps you with cutting work of a comparatively large and long thing.
- It is so thick as 6mm (1/4") and you can press and hold mechanicals securely.
- Provided with a virtually damage-free stainless edge on the rear side so that you can slide and move the scale body with ease.
- The graduation part could be seldom rubbed and worn out since a steel measure is put on the scale body for more durability.
Measurement unit: millimeter ONLY. (Feet and inches are not available on the scale.)
Model Dimensions
(mm / in.)Weight
(g / oz.)Our Price
(Japanese yen)60LS 630 x 60 x 6mm or 24-13/16" x 2-3/8" x 1/4" 260g or 9-3/16 oz. ¥6,300 100LS 1030 x 80 x 6mm or 40-9/16" x 3-1/8" x 1/4" 600g or 21-3/16 oz. ¥10,500
Note
- It is broad enough to make mechanical work much more comfortable.
- Provided with virtually damage-free stainless edges on the two surfaces without the scales.
- Helps you draw and measure parallel and perpendicular lines efficiently by using 5mm (approx. 3/16") -unit sections marked on the scale.
Measurement unit: millimeter ONLY. (Feet and inches are not available on the scale.)
Model Dimensions
(mm / in.)Weight
(g / oz.)Our Price
(Japanese yen)20R 200 x 100 x 3mm or 7-7/8" x 3-15/16" x 1/8" 70g or 2-1/2 oz. ¥1,950 30R 300 x 150 x 3mm or 11-13/16" x 5-7/8" x 1/8" 160g or 5-5/8 oz. ¥3,250
STEN-Edge Scale 24T-45 / 24T-60
Note
- Useful for cutting work and when drawing parallel and perpendicular lines.
- Provided with virtually damage-free stainless edges on the two sides.
- 5mm (approx. 3/16") -unit sections and 5mm-unit parallel lines are marked on the scale for optimum operational ease.
- Both a 24cm (9-7/16") right-angled triangle with 30°, 60°, 90° and an isosceles triangle with 45°, 45°, 90° are available. (You can purchase each model separately.)
Measurement unit: millimeter ONLY. (Feet and inches are not available on the scale.)
Model Dimensions
(mm / in.)Weight
(g / oz.)Our Price
(Japanese yen)24T-45 240 x 3mm or 9-7/16" x 1/8", 45° 50g or 1-3/4 oz. ¥1,450 24T-60 240 x 3mm or 9-7/16" x 1/8", 60° 55g or 1-15/16 oz. ¥1,550
STEN-Edge Scale 30T-45 / 30T-60
Note
- Useful for cutting work and when drawing parallel and perpendicular lines.
- Provided with virtually damage-free stainless edges on the two sides.
- 5mm (approx. 3/16") -unit sections and 5mm-unit parallel lines are marked on the scale for optimum operational ease.
- Both a 30cm (11-13/16") right-angled triangle with 30°, 60°, 90° and an isosceles triangle with 45°, 45°, 90° are available. (You can purchase each model separately.)
Measurement unit: millimeter ONLY. (Feet and inches are not available on the scale.)
Model Dimensions
(mm / in.)Weight
(g / oz.)Our Price
(Japanese yen)30T-45 300 x 3mm or 11-13/16" x 1/4", 45° 75g or 2-5/8 oz. ¥1,850 30T-60 300 x 3mm or 11-13/16" x 1/4", 60° 85g or 3 oz. ¥1,950
STEN-Edge Scale 36T-45 / 36T-60
Note
- Useful for cutting work and when drawing parallel and perpendicular lines.
- Provided with virtually damage-free stainless edges on the two sides.
- 5mm (approx. 3/16") -unit sections and 5mm-unit parallel lines are marked on the scale for optimum operational ease.
- Both a 36cm (14-3/16") right-angled triangle with 30°, 60°, 90° and an isosceles triangle with 45°, 45°, 90° are available. (You can purchase each model separately.)
Measurement unit: millimeter ONLY. (Feet and inches are not available on the scale.)
Model Dimensions
(mm / in.)Weight
(g / oz.)Our Price
(Japanese yen)36T-45 360 x 3mm or 14-3/16" x 1/8", 45° 100g or 3-1/2 oz. ¥2,600 36T-60 360 x 3mm or 14-3/16" x 1/8", 60° 115g or 4-1/16 oz. ¥2,800
